|
 |
|
|
|
Stock Upgraded
|
|
|
|
Shock Bolt Upgrade
Application: Suzuki DR650 '96 - Present
MMP P/N 10555 ........................................... $4.25 (set of
2)
Photo shows old and new bolt head size.
Prevent stripping aluminum clevis threads. The 14mm
head replacement bolt has a larger flange allowing 36 ft-lbs
torque instead of 40 ft-lbs, making removal easier.
|
|
|
Progressive Fork Springs
Application DR650 1996 - Present
MMP P/N: 1510 ...........................................$107.95
Manufactured from high quality chrome silicon wire.
Progressive rate fork springs provide a plush ride while
soaking up small bumps and firm enough to absorb big
bumps. This spring was carefully designed for the DR650
to reduce front end dive under hard braking and still provide
ride comfort.
|
|
|
DR650 34mm Chain Roller Kit
Applications: Suzuki DR650 '96 - Present
Manufacture: Exclusive for MMP
MMP P/N: 10064............................................$15.25
Pair...................................................................$28.00
Upgraded replacement for the upper and lower factory plain
bushing chain roller. This unit uses precision ball bearings
and is double sealed. Most owners should only need to
replace the lower roller since that gets the most wear. We
recommend buying two so you have a spare. Available in
black only.
|
|
 |
|
|
|
525 Chain
|
|
|
 |
|
|
520 Chain
|
|
|
DR650 Final Drive Chain - 525
Applications: Suzuki DR650 '96 - Present
Manufacture: D.I.D.
MMP P/N: 10062
The DID 525VM2 Gold Chain is the longest lasting drive
chain we have found for the DR650 for both street and off
road use.
110 links (stock gearing) MMP P/N:10062 .... $131.50
DR650 Final Drive Chain - 520
Applications: Suzuki DR650 '96 - Present
Manufacture: D.I.D.
MMP P/N: 10063
The D.I.D.520VM Gold Chain is lighter than the 525 chain,
is long lasting with proper adjustment and lubing and has
many choices in gearing combinations.
110 links (stock gearing) MMP P/N:10063 .... $119.30
|
|
 |
|
|
|
Click HERE to see how it looks installed
You can have it with or without the license
plate light. New light splices into the stock
wiring.
|
|
|
|
DR650 License Plate Holder
Applications: Suzuki DR650 '96 - Present
Manufacture: Top Gun Motorcycle Products
Top Guns new aluminum License Plate Holder for the
DR650SE, replaces the big ugly inner fender that holds the
plate and heavy stock light. Cleans up and simplifies the
appearance of the rear fender, gives the bike an
uncomplicated look. Recommended for DR650s running
off road and using big knobby tires.
Installation Instructions
Bracket w/light - MMP P/N:10104.. $35.00
Bracket w/o light - MMP P/N:10105.. $25.00
Replacement light - MMP P/N:10106.. $15.00
|
|
|
Rim locks
Applications: Most Multisurface Motorcycles
Manufacture: Motion Pro
MMP P/N: 10019
Motion Pro rim lock keeps the tire from spinning on the rim
during hard acceleration or braking when running low air
pressure for off road conditions. See article for more info
Rim Lock, 1.60" Frt - MMP P/N:10049..........$8.50
Rim Lock, 1.85" Frt - MMP P/N:10050..........$8.50
Rim Lock, 2.50" Rear - MMP P/N:10051.....$9.50
|
|
 |
|
|
|
525 Sprockets
|
|
|
 |
|
|
|
520 Sprockets - Use stock Chain
Length
|
|
|
|
We've used JT sprockets for years in
Baja and found they last longer than
anything else we have tried. JT
sprockets uses high carbon steel for
rear sprockets and chromoly steel
alloy for front sprockets.
|
|
|
|
|
DR650 Sprockets - 525
Applications: Suzuki DR650 '96 - Present
Manufacture: JT Sprockets
MMP P/N: (see below)
Counter Shaft Sprockets
JT1448-14T Counter Sprocket - MMP P/N:10057.. $15.25
JT1448-15T Counter Sprocket - MMP P/N:10058.. $15.25
Rear Sprockets
JT1791- 41T Rear Sprocket - MMP P/N:10059....... $37.82
JT1791- 42T Rear Sprocket - MMP P/N:10060....... $37.82
JT1791- 43T Rear Sprocket - MMP P/N:10061....... $37.82
DR650 Sprockets - 520
Applications: Suzuki DR650 '96 - Present
Manufacture: JT Sprockets and RB Sprockets
MMP P/N: (see below)
Counter Shaft Sprockets
RB 14T Counter Sprocket - MMP P/N:100............... $15.25
Rear Sprockets
JT822- 41T Rear Sprocket - MMP P/N:200.............. $31.78
JT822- 42T Rear Sprocket - MMP P/N:300.............. $31.78
JT822- 43T Rear Sprocket - MMP P/N:400.............. $33.24
|
|
|
Note: 15/42 is stock gearing, 14T sprockets require trimmed
countershaft sprocket plate MMP P/N:10056
|
|
|
|
|
DR650 Trimmed Plate for 14T Sprocket
Applications: Suzuki DR650 '96 - Present
Manufacture: Exclusive for MMP
MMP P/N: 10056............................................$11.25
DR650 Trimmed factory countershaft sprocket plate allows
you to use a 14 tooth counter sprocket without the chain
hitting the stock size plate.
Note: Some enlarging of 1 or 2 of the bolt holes may be
necessary for proper fit. Also it is not necessary to use the
factory rubber noise buffering ring.
|
